Testing Inflation: A Bootstrap Approach

We note that the essential idea of inflation, that the universe underwent a brief period of accelerated expansion followed by a long period of decelerated expansion, can be encapsulated in a "closure condition" which relates the amount of accelerated expansion during inflation to the amount of decelerated expansion afterward. We present a protocol for systematically testing the validity of this condition observationally.Comment: 4 pages, 2 figures, matches Phys. Rev. Lett. versio

Analytical design and performance studies of the nuclear light bulb engine

Analytical studies were conducted to investigate in detail the heat balance characteristics of the nuclear light bulb engine. Distributions of energy deposition to all engine components from the fission process, conduction and convection, and thermal radiation were considered. Where uncertainties in basic data or heat transfer characteristics were encountered, ranges of heat loads were calculated and reference values were selected. The influence of these heat loads on engine performance, space radiator requirements, and cooling sequence and cooling circuit designs was determined. The analyses resulted in revisions to the previously reported reference engine characteristics, principally in the heat loads to some engine components and in the cooling sequence. These revisions were incorporated in the engine dynamics digital computer simulation program. No significant changes occurred in the dynamic response of the engine to perturbations in fuel injection rate, reactivity or exhaust nozzle area

Analytical studies of nuclear light bulb engine radiant heat transfer and performance characteristics

Analytical model of nuclear light bulb engine radiant heat transfer and engine performance, dynamics and control, heat loads and shutdown characteristic

Studies of nuclear light bulb start-up conditions and engine dynamics

Deep Space Network for two-way communications with unmanned spacecraft at planetary distances - Vol.

Heat capacity mapping mission project HCM-051

There are no author-identified significant results in this report

Tomography of atomic number and density of materials using dual-energy imaging and the Alvarez and Macovski attenuation model

Dual-energy computed tomography and the Alvarez and Macovski [Phys. Med. Biol. 21, 733 (1976)] transmitted intensity (AMTI) model were used in this study to estimate the maps of density (ρ) and atomic number (Z) of mineralogical samples. In this method, the attenuation coefficients are represented [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)] in the form of the two most important interactions of X-rays with atoms that is, photoelectric absorption (PE) and Compton scattering (CS). This enables material discrimination as PE and CS are, respectively, dependent on the atomic number (Z) and density (ρ) of materials [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)]. Dual-energy imaging is able to identify sample materials even if the materials have similar attenuation coefficients at single-energy spectrum. We use the full model rather than applying one of several applied simplified forms [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976); Siddiqui et al., SPE Annual Technical Conference and Exhibition (Society of Petroleum Engineers, 2004); Derzhi, U.S. patent application 13/527,660 (2012); Heismann et al., J. Appl. Phys. 94, 2073–2079 (2003); Park and Kim, J. Korean Phys. Soc. 59, 2709 (2011); Abudurexiti et al., Radiol. Phys. Technol. 3, 127–135 (2010); and Kaewkhao et al., J. Quant. Spectrosc. Radiat. Transfer 109, 1260–1265 (2008)]. This paper describes the tomographic reconstruction of ρ and Z maps of mineralogical samples using the AMTI model. The full model requires precise knowledge of the X-ray energy spectra and calibration of PE and CS constants and exponents of atomic number and energy that were estimated based on fits to simulations and calibration measurements. The estimated ρ and Z images of the samples used in this paper yield average relative errors of 2.62% and 1.19% and maximum relative errors of 2.64% and 7.85%, respectively. Furthermore, we demonstrate that the method accounts for the beam hardening effect in density (ρ) and atomic number (Z) reconstructions to a significant extent.S.J.L., G.R.M., and A.M.K. acknowledge funding through the DigiCore consortium and the support of a linkage grant (LP150101040) from the Australian Research Council and FEI Company

Heat Capacity Mapping Mission

The Tasman Front was delineated by airborne expendable bathythermograph survey; and an Heat Capacity Mapping Mission (HCMM) IR image on the same day shows the same principal features as determined from ground-truth. It is clear that digital enhancement of HCMM images is necessary to map ocean surface temperatures and when done, the Tasman Front and other oceanographic features can be mapped by this method, even through considerable scattered cloud cover

Acoustic tests of duct-burning turbofan jet noise simulation

The results of a static acoustic and aerodynamic performance, model-scale test program on coannular unsuppressed and multielement fan suppressed nozzle configurations are summarized. The results of the static acoustic tests show a very beneficial interaction effect. When the measured noise levels were compared with the predicted noise levels of two independent but equivalent conical nozzle flow streams, noise reductions for the unsuppressed coannular nozzles were of the order of 10 PNdB; high levels of suppression (8 PNdB) were still maintained even when only a small amount of core stream flow was used. The multielement fan suppressed coannular nozzle tests showed 15 PNdB noise reductions and up to 18 PNdB noise reductions when a treated ejector was added. The static aerodynamic performance tests showed that the unsuppressed coannular plug nozzles obtained gross thrust coefficients of 0.972, with 1.2 to 1.7 percent lower levels for the multielement fan-suppressed coannular flow nozzles. For the first time anywhere, laser velocimeter velocity profile measurements were made on these types of nozzle configurations and with supersonic heated flow conditions. Measurements showed that a very rapid decay in the mean velocity occurs for the nozzle tested

Acoustic tests of duct-burning turbofan jet noise simulation: Comprehensive data report. Volume 2: Model design and aerodynamic test results

The selection procedure is described which was used to arrive at the configurations tested, and the performance characteristics of the test nozzles are given

Improving performance through HEI–industry engagements in the built environment

The poor performance and inefficiencies of the construction industry are well recognized and documented. Through a variety of combined industry and government initiatives there has been a continual expression in the UK over the last decade of the urgent need to address the fragmented nature of the industry to improve its performance. A major challenge is for education and industry stakeholders to create closer and more effective relationships with each other to facilitate greater mutual understanding. ‘Accelerating Change in Built Environment Education’ (ACBEE) is a sponsored initiative designed to encourage the closer working together of industry, education and professional bodies to provide more relevant training and education. This paper introduces ACBEE, along with an evaluation framework for measuring the performance of engagements at various levels. This is followed by an analysis of the application of this performance measurement framework through case studies of industry–education engagement. A number of case studies were identified as operating at the grades of ‘strategic alliance’ and ‘partnership’ (as classified in the ACBEE evaluation framework). The analysis of these cases focuses on the drivers behind and the purpose of the engagement, and how these are aligned with the business strategy of the collaborating organizations and measurement of the activity. Evidence of meeting the explicit business needs and strategic objectives and the contribution to good practice knowledge are also discussed